The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX.

Using the VE.Direct to Bluetooth Smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect App. View information wirelessly such as battery status and solar panel power, plus other useful data. The dongle is able to read data from all products with a VE.Direct port, such as the BMV-70x series battery monitors, Phoenix Inverters with VE.Direct port, MPPT Solar Charge Controllers. 

The Anti-Islanding Box 63A single and three phase is a combination of an
anti-islanding device, the Ziehl UFR1001E, two in-line contactors and main
circuit breaker. It is suitable for both single phase or
3 phase systems. It is rated up to 63A per phase and all parts are conveniently
housed in an IP65 rated enclosure.

The Anti-Islanding Box can
be added to a grid-feeding inverter/charger system (ESS) to meet local
anti-islanding regulations. Note that Ziehl UFR1001E is also available as a separate product, see its product page.

The UFR1001E monitors voltage and frequency in plants for own generation of electricity. It fulfills the requirements of VDE-AR-N 4105 bdew-directive, G59/3, G83/2 and ÖVE/ÖNORM E 8001-4-712:2009 for generators connected to the public grid. For more information, we refer you to the datasheet and certificates below which are available to download. Or visit www.ziehl.de and look for the UFR1001E under the Mains monitoring group.Note that we also stock a pre-built box including the Ziehl UFR1001E, two in-line 63A contactors and a main circuit breaker: the Anti-Islanding Box 63A single and three phase.

Smart and professional; this new snap shut carry case provides protective stowage and easy transport for your Blue Smart IP65 charger, and its accessories.Compartments accommodate the charger, its input/output cables; plus the battery-clamp/eyelet cable options.There are
two sized available:For BPC
Chargers up to 12/15 and 24/8 - 295 x 350 x 105mmFor BPC
Chargers 12/25 and 24/13 - 345 x 520 x 130mm(Charger and accessories not included)

This Wall Mount will be especially useful if you like to keep your smart charger handy - above your workshop bench, for example. Now the charger can be used without even moving it!

The IP65 Charger is already protected against dust, and water spray - now you can protect it from accidental damage too. This rubber bumper allows it to withstand the knocks and bangs of workshop life. It will extend the life of your charger, and it has an easy-carry handle, ...or hang it from a hook when not in use.There are two sizes available: Blue Smart IP65 Charger 12/10, 12/15 & 24/8Blue Smart IP65 Charger 12/25 & 24/13

The Battery Indicator Eyelet M8 is an accessory for the Blue Smart IP65 Chargers.

The battery indicator panel shows the state of charge of the battery. It is an accessory for the Blue Smart IP65 Chargers.Suitable for 12V lead acid batteries (flooded, GEL, AGM)

The 12V cigarette lighter plug, with fuse, is an accessory for the Blue Smart IP65 Charger with DC connector. With this plug you can charge your vehicle battery via the cigarette lighter socket.

The 2 meter extension cable is an accessory of the Blue Smart IP65 Charger with DC connector.

The clamp connector with fuse is an accessory for the Blue Smart IP65 Chargers.

The M6/M8 eyelet connector with fuse is an accessory for the Blue Smart IP65 Charger with DC connector.

with 30A ATO fuse

MagCode Power Port.

This pair of Zigbee converters is to wirelessly connect an Energy Meter to a GX Device.Zigbee to USB converter, DRF2658C, DTKZigbee to RS485 converter, DRF2659C, DTK

Energy Meters are typically used in an Energy Storage System, to measure the power and energy of the whole application at the distribution box. Also they can be used to measure the output of a PV Inverter, to display the data on GX device such as the Cerbo GX and the VRM Portal.There are several models available from Victron:ET112 (for single phase max. 100A)ET340 (for three phase max. 65A)EM24 Ethernet (for three-phase max. 65A)EM540 (RS485 - for three-phase max. 65A)For more information, please see the selection guide PDF below.

CANvu GX IO Extender and wiring kit.

Current Transformer 100A:50mA for MultiPlus-II / MultiGrid-II to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing. See MultiPlus-II datasheet for more details.Note that there are two types:CTR11xxxx has a jack connector
CTR12xxxx has a wire end
 Both types are available with 1, 5 and 20 meter cable lengths.

The AC Current sensor is a simple external current sensor used to measure AC Current, Power (VA) and calculate energy of a PV Inverter connected to the AC input or output of a Multi or Quattro. These values can then be displayed and sent to the VRM-website by the Color Control. The two measurement wires can be connected to the AUX and/or temperature sense input of a Multi or Quattro.