Besides an assortment of ANL, MIDI and MEGA fuses, we feature three different types of fuse holders:
Simple single fuse holders for each of above fuse types. A six-way fuse holder, MEGA fuses only. Modular single fuse holders, for MEGA fuses only. With an optional busbar accessory to efficiently connect multiple fuses together. 
For a full list of available parts, refer to the price list. For more technical information, see the respective datasheets. Besides above fuse holders, we also have the Lynx Power In and the Lynx Distributor, part of the Lynx 1000 Amp distribution system. See the DC Distribution section on our website.

Busbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.
We offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protection cover. Available models:
150A / 70V - 4 high current connections
150A / 70V - 6 high current connections
150A / 70A - 2P with 10 screws +cover
150A / 70A - 2P with 20 screws +cover
250A / 70V - 4 high current connections
250A / 70V - 6 high current connections
250A / 70A - 2P with 6 screws +cover
250A / 70A - 2P with 12 screws +cover
600A / 70V - 4 high current connections and 8 low current connections
600A / 70V - 8 high current connections and 8 low current connections 
For more technical information and for the busbar dimensions see the datasheet. 

A modular DC busbar, used to connect batteries to the Lynx DC distribution system.

A modular DC busbar, with locations for four DC fuses. It will monitor the status of each fuse, and indicate its condition with a LED on the front. Part of the modular Lynx distribution system.

The Lynx Shunt VE.Can is an intelligent 1000A shunt with location for a fuse (not included), the built-in battery monitor accurately monitors the state of charge of your battery. Use a GX device (e.g. Cerbo GX) for reading out the information. Part of the modular Lynx distribution system.

The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option. Its main features are:Built-in 500A contactor used as a fallback safety mechanism and also suitable as a remote controllable main system switch.Battery monitor, indicating state of charge percentage and more data.Pre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell.Bluetooth for use with our VictronConnect App, for setup and monitoring.Local and remote monitoring using a Victron GX device, for example the Cerbo GX.The Lynx Smart BMS is part of the modular Lynx Distribution system.