All products

This optional temperature sensor is designed for the BMV-712 and BMV-702 battery monitors. It measures the main battery temperature to optimise charging and lets you set high and low temperature alarms.

When the CAN bus is not powered by a Skylla-I or an MPPT, you will need the new VE.Can Power Cable to supply the power.

This cable can be used to extend the BMS communication cables. This works for Lithium Smart batteries in combination with a Smart BMS or between Lithium NG batteries in combination with a NG BMS. It ships in a bag of 2 pieces and is available in 1, 2, 3 and 5 m lengths.

Use this cable to connect a Skylla-i to a VE.Bus BMS. The VE.Bus BMS will then disable the Skylla-i charger when the batteries are fully charged.

In the Orion-Tr Isolated DC-DC Chargers the remote on/off circuit is referenced to the primary battery (e.g. starter battery). The Orion-Tr DC-DC Charger Isolated remote cable is intended for applications where the remote on/off signal is referenced to the secondary battery (e.g. lithium battery with BMS).

Use this cable to connect a Victron product with a VE.Can port to a NMEA 2000 network. More information in the NMEA 2000 & MFD integration guide.

Use this cable to connect the (discontinued) Phoenix Inverter 12/180, 24/180, 12/350 or 24/350 to a VE.Bus BMS or a BlueSolar MPPT Charger that features a load output: VE.Bus BMS: the Inverter will be switched off when the batteries are emptyBlueSolar MPPT Charger: connecting an inverter directly on the load output of a BlueSolar MPPT Charger is not possible; the inverter needs to be connected to the battery. Then use this cable to switch the inverter on and off with the load output.

Use this cable to remotely control BlueSolar and SmartSolar MPPT charge controller models. Note that it's not necessary to use this cable on the larger SmartSolar models, as they feature an onboard Remote On/Off terminal. The charger will be enabled when the signal on the cable is high. The charger is disabled when the source signal is pulled low or left free floating. Note that when using this cable, it's not possible to use the VE.Direct port for any other purpose. Such as connecting to a GX device, or for example a VE.Direct Bluetooth Smart dongle on a BlueSolar charger.

With the BlueSolar PWM-Pro to USB interface cable you can connect the BlueSolar PWM-Pro to your computer.Read the manual for more information.

The VE.Direct TX digital output cable can be used in combination with the BlueSolar and SmartSolar MPPT chargers. It supports the following applications:- Solar lighting applications- Virtual load output

The Lithium SuperPack NG is a drop-in replacement for lead-acid batteries, ideal for new builds or retrofits, and works with the VictronConnect app. Available in 12V and 24 models, it features a built-in Battery Management System, integrated heating for subzero charging, and an on/off switch for safe off-season storage without removing the battery. With the VictronConnect app, users can monitor State of Charge and configure settings. Capable of continuously delivering peak power, the Lithium SuperPack NG eliminates the need for bulky battery banks. It fits under a passenger seat or in other tight spaces, making a lithium upgrade even easier. With its bi-directional e-switch to avoid unnecessary shutdowns and multiple protection layers for harsh environments, the Lithium SuperPack NG provides lithium power that simply works. Anywhere.

The MultiPlus-II is a multifunctional inverter/charger with two AC outputs. Suitable for professional marine, yachting, vehicle, and land-based off-grid systems, it also provides the isolation and redundancy required for ESS setups. PowerControl allows the MultiPlus-II to prevent grid or generator overload, while PowerAssist boosts AC power during peak demand. In the event of an outage, the inverter switches over in milliseconds, keeping computers and sensitive electronics running without interruption. The battery charger combines speed with efficiency through a smart adaptive algorithm that extends battery life. Ready for expansion, the MultiPlus-II supports parallel and three-phase configurations when a system needs to scale. Note: for a short period of time this product was called MultiGrid-II.

The MultiPlus, as the name suggests, is a combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.

The SolarSense 750 is an innovative, fully self-sufficient wireless device designed to help optimise PV energy usage and monitor the health of your photovoltaic (PV) installation.