Аксесоари

The 2 meter extension cable is an accessory of the Blue Smart IP65 Charger with DC connector.

The Ekrano GX Wall Mount accessory enables quick and secure installation on a solid wall. Only four screws are needed, with no additional drilling or cut-outs required. The enclosure is easily accessible: it opens from the top with two screws and folds forward without being removed from the wall, allowing straightforward connection of additional cables to the interfaces of the Ekrano GX from the sides, top, bottom, or back.

The Pre-charge Cable allows internal capacitors of an inverter, inverter/charger or MPPT to be pre-charged via the DC terminals before connecting the battery. This method ensures that connecting the battery will not result in arcing at the connection point.

The SolidSwitch 104 will switch DC loads of up to 70V/4A and can be controlled by a low power digital signal. The DC load can be resistive, capacitive or inductive (such as the coil of a high-power contactor).The SolidSwitch is not reverse polarity protected and not short circuit proof.

The GX Touch 50 & 70 protection cover prevents damage from UV light during prolonged exposure to the sun.

The GX Touch wall mount accessory allows easy mounting of the GX Touch on a solid wall. No drilling or cut-out is required, other than the three screws that fix the wall mount onto the wall.

DIN-Rail adapter to easily mount a device on a DIN-Rail. Suitable for the Cerbo GX.

GX WiFi module long range (Netgear AC1200).

The 12V cigarette lighter plug, with fuse, is an accessory for the Blue Smart IP65 Charger with DC connector. With this plug you can charge your vehicle battery via the cigarette lighter socket.

This adapter is designed to easily replace the CCGX display with the newer GX Touch. Contents of the packaging are the metal bracket, the plastic bezel, and four mounting screws. There are two methods of mounting: “Install including screen” - most secure mounting of the GX Touch display “Install excluding screen” – GX Touch display is easier to remove, and the adapter can be mounted before completing the wiring Refer to the Quick Installation Guide for details.

Outdoor LTE-M puck antenna. Length: 3 meters.

Outdoor LTE-M wall-mount antenna. Length: 5 meters.

The MPPT WireBox provides an extra level of safety, and is particularly useful if your MPPT Solar Charger is installed in a general access area. It covers all DC terminals, preventing accidental or inquisitive contact with terminal screws.There are various sizes available:MPPT WireBox-S 75-10/15MPPT WireBox-S 100-15MPPT WireBox-S 100-20MPPT Wirebox-M 100-30/50 & 150-35/45MPPT WireBox-L Tr 150-60/70 & 250-60/70MPPT WireBox-XL Tr 150-85/100 & 250-85/100MPPT WireBox-XL Tr 150-85/100 & 250-85/100 VE.Can

The MPPT WireBox provides an extra level of safety, and is particularly useful if your MPPT Solar Charger is installed in a general access area. It covers all DC terminals, preventing accidental or inquisitive contact with terminal screws.There are various sizes available:MPPT WireBox-L MC4 150-45/60/70 & 250-60/70MPPT WireBox-L MC4 150/70 & 250/70 VE.CanMPPT WireBox-XL MC4 150-85/100 & 250-85/100MPPT WireBox-XL MC4 150-85/100 & 250-85/100 VE.Can

This pair of Zigbee converters is to wirelessly connect an Energy Meter to a GX Device.Zigbee to USB converter, DRF2658C, DTKZigbee to RS485 converter, DRF2659C, DTK

MagCode Power Port.

The Victron MagCode Power Clip is a magnetic 12V connector designed for quick and reliable connections between the Blue Smart IP65 Charger and a vehicle’s power inlet. It has a 30A ATO fuse and is rated for use up to 15A.

The M6/M8 eyelet connector with fuse is an accessory for the Blue Smart IP65 Charger with DC connector.

The clamp connector with fuse is an accessory for the Blue Smart IP65 Chargers.

The battery indicator panel shows the state of charge of the battery. It is an accessory for the Blue Smart IP65 Chargers.Suitable for 12V lead acid batteries (flooded, GEL, AGM)

The Battery Indicator Eyelet M8 is an accessory for the Blue Smart IP65 Chargers.