Всички продукти

The SmartSolar MPPT RS solar charge controllers are Victron's solution for systems with large series connected PV arrays charging 48 V DC battery banks. This product is perfect for large off-grid, and grid connected battery systems.Available in a 5.76kW and 11.52kW model, features include a wide 65-450 VDC operating solar voltage input, independent tracking inputs, full connectivity, isolated PV connections, display screen, fully programmable battery charging parameters and active cooling. The new metal case design and fully covered electrical connections improve the safety and modernise the presentation in line with the latest suite of Victron products.

BlueSolar PWM-LCD&USB Liquid Crystal Display Two 5 Volt USB outputs Lighting control function, fully programmable Three stage battery charging (bulk, absorption, float), fully programmableLoad output with low voltage and manual disconnect (programmable)Load output protected against over load and short circuitProtected against reverse polarity connection of the solar panels and/or batteryBlueSolar PWM DUO-LCD&USB All the above-mentioned functions, plus: Charges two separate batteries Programmable charge current ratio External Temperature sensor

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.

BlueSolar PWM-Pro  The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable.  • Lighting control function, fully programmable.  • Three stage battery charging (bulk, absorption, float), fully programmable. • Integrated battery monitor function (Remote Panel needed to display state of charge). • Load output with low voltage disconnect and manual control (default setting). • Optional external temperature sensor. • Load output protected against over load and short circuit. • Protected against reverse polarity connection of the solar panels and/or battery. • Day/night timing options: see manual Remote Panel for details.  BlueSolar PWM-Light • Load output with low battery voltage disconnect function. • Lighting control function, one timer only.  • Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting.  • Three stage battery charging (bulk, absorption, float), not programmable. • Load output protected against over load and short circuit. • Protected against reverse polarity connection of the solar array and/or battery. • Day/night timing options: see manual for details 

Low voltage-temperature coefficient enhances high-temperature operation.Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.25-Year limited warranty on power output and performance.5-Year Limited warranty on materials and workmanship.Sealed, waterproof, multifunctional junction box gives high level of safety.High performance bypass diodes minimize the power drop caused by shade.Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.Pre wired quick-connect system with PV-ST01 connectors.

The Ekrano GX represents the next generation in the GX product family. With its complete range of connections and interfaces as well as its integrated 7-inch touchscreen display, it is the most powerful GX device to date and allows you toalways have perfect control over your system from wherever you are and to maximise its performance. Simply access your system via our Victron Remote Management (VRM) portal, or access it directly, using the built-in touchscreen, a Multi-Functional Display (MFD) or our VictronConnect app thanks to its built-in WiFi Access Point.The Ekrano GX is also the successor to the Color Control GX.

This all-new communication-centre allows you to always have perfect control over your system from wherever you are and maximises its performance. Simply connect through our Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch, a MFD or our VictronConnect App thanks to its built-in WiFi Access Point. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way. Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50.

We believe that having insight into your installation is a key factor in maintaining and operating your off-grid energy solutions. Off-grid should not mean off-line, so we have created the GlobalLink 520. This device will bring 4G LTE-M connectivity to all VE.Direct enabled devices without any monthly fees or subscriptions, for the first five years.

The Venus GX is the communication-centre of your installation. Venus allows you to talk to all components in your system and ensure they are working in harmony. Monitoring of live data, and changing settings is performed by using your smartphone (or other device) via our free-to-use Victron Remote Management Portal (VRM).DEPRECATED: For new installs, we recommend the equally priced yet far more powerful Cerbo GX.

The GX Tank 140 takes readings from up to four tank level sensors. It is an accessory for our range of GX system monitoring products, of which the Cerbo GX is the most commonly used model.Tank levels can be read-out locally in the system, see screenshot, as well remotely through our VRM Portal.The GX Tank 140 is compatible with current senders (4 to 20 mA) as well as voltage senders (0 to 10 V). The connection to the GX Device is via USB, which is also how the GX Tank is powered: no additional power wires required.Tank sender wiring is kept as simple as possible: two of the four inputs provide a 24 V power supply, to power the sender. The other two channels do require an external power supply, and there is a power in terminal together with fused outputs to facilitate that. Upper and lower limits are configurable, to allow using senders that provide only part of the scale, for example 0 to 5 V.To provide a stable reading, the readings are averaged damping. The damping can be configured between 1 and 60 seconds.Faulty sensors and wiring issues are detected: an alarm will be raised when values are out of range. For marine applications, the GX Device can transmit these tank levels on the NMEA 2000 network to be picked up by other displays such as an MFD.

The GX LTE 4G is a cellular modem for our GX range of monitoring products. It provides a mobile internet connection for the system and connection to the VRM Portal. It works on 2G, 3G and 4G networks.There are multiple models, refer to the manual to see which model best matches the available cellular network bands in your area.The GX LTE includes a built-in GPS receiver. When the optional GPS antenna is installed, the system can be tracked as well as Geo-fenced on the VRM Portal.

The GX GSM is a modem & GPS accessory for our GX range of monitoring products. The GX GSM is a cellular modem; providing a mobile internet for the system and connection to the VRM Portal. It works on 2G and 3G networks. It includes a built-in GPS receiver. When the optional GPS antenna is installed, the system can be tracked as well as Geo-fenced on the VRM Portal. Note that many telecom operators are in the process of shutting down their 3G networks. Make sure to consider the replacement product, the GX LTE 4G, as well.

The VE.Bus Smart dongle is two products in one:First of all it is the Bluetooth accessory for our range of inverter/chargers: Multis, MultiPlusses, MultiPlus-II, MultiGrid, MultiGrid-II, Quattros, and our series of Phoenix Inverters with a VE.Bus port. When installed, use the VictronConnect App to monitor operation and also operate the system: change the input current limit as well as switch between Off, On and Charger-only modes.Secondly it can work as a Voltage- and Temperature-sense device for the inverter/charger. This works with all models.For monitoring, the device is a great alternative in caravans, smaller yachts and motor homes for which the Color Control GX or Venus GX are a step too far.It also adds Instant Readout to the VE.Bus product and displays the inverter/charger's key data on the VictronConnect device list page without requiring a connection to the product. This includes visual notifications of warnings, alarms, and errors, allowing for at-a-glance diagnostics.

The GX Touch 50 and GX Touch 70 are display accessories for our Cerbo GX. The five inch and seven inch touch screen displays give an instant overview of your system and allow to adjust settings in the blink of an eye. Simply connected to the Cerbo GX with one cable, Their super slim waterproof design, top-mountable setup and simple installation bring a lot of flexibility when creating a crisp and clean dashboard. Watch the new video that explains all there is to know about installing the new Cerbo GX & GX Touch 50.

The MPPT Control lets you see the status as well as setup all BlueSolar MPPT Charge Controllers that have a VE.Direct communications port. The MPPT Control is mounted in the familiar BMV-700 series housing, maintaining a consistent and professional look to your panels and systems monitoring equipment. See the user and installation manual as well as our MPPT Control blog post for more information. To easily mount the MPPT Control on a wall, instead of flush mounted in a panel, use one of our wall mount enclosures. See the related products slider below. Features: View live status information, including solar watts, battery voltage, charge current, load current and more.View historical information A. All-time values B. 30-day historical valuesMPPT setup

The SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.

This panel is intended both for Multis and Quattros. It allows PowerControl and PowerAssist current limit setting for two AC sources: a generator and shore side current for example. Setting range: up to 200 Amps. The brightness of the LEDs is automatically reduced during night time.

The Digital Multi Control is used to remotely view and adjust AC input currents, and turn on and off the Multi or Quattro. It is designed to integrate cleanly with your boat, vehicle or house system control panel. The Digital Multi Control panel (DMC) is designed to work with all Multi/Quattro. This includes stand alone, parallel and 2-3 phase configurations. Connecting the DMC to your system is simple, in most cases just connecting the DMC with an RJ45 cable is sufficient and no extra set-up handling is required.

The Skylla Control allows you to alter the charge current and see the system status.

The Skylla-i Control allows you to alter the charge current and see the system status.